Double side adhesive strong foam tape

Double side adhesive strong foam tape 

Strong indoor tape is a multi-purpose self-adhesive surface double-sided tape, can be used for a variety of household use. Can be a perfect alternative to drilling, will not cause damage to the wall; if you do not want to use, remove the installation of tape can be. Desha strong indoor tape can be firmly fixed plane objects, tape width of 10 mm, can provide a flat repair effect. In the case of good paste, a 10 cm long load-bearing tape can bear up to 5 kg of heavy objects. You can use it on any surface of a sufficiently flat surface, including tiles, planks and most of the plastic.
First of all, please check that you want to paste the surface strong enough, flat, can bear the object. The next step is to clean the area with alcohol or no silicone cleaner. The double-sided adhesive tape is applied vertically to the back of the object. Remove the protective film, fix it, be careful not to touch the adhesive surface. Fixed for 5 seconds.

Holds on a Variety of surfaces
INDOOR is designed to give a permanent hold on a variety of surfaces inside the home. A single 10 cm strip can hold up to 5 kg if the surface is strong.

No fuss, no mess
A pair of scissors and this roll is all you need to get things like key cupboards and decorations attached on the wall, permanently. You can forget the hassle of using a hammer or a drill and you won’t damage your walls, either. Plus, surface irregularities aren’t a problem. Before using, make sure that your surface is strong enough to take the weight of the object you want to attach.

How to remove
Because it is designed for permanent hold, it is not made to be removed. Just in case that is something you have to do – use a cutting wire to cut the foam core, then try to tear off the remaining tape. This might damage the surface and/or leave remnants behind.

How to apply – Step by step
1. Clean the surface of dirt and dust with a dust-free cloth, to ensure the best possible bond.

2. Attach the foam tape to the rougher surface first. In the case of wallpaper or plaster, this will be the wall. Stick on vertical strips that are the same length as the entire length of the object. Extra should be applied to the upper portion in shorter strips, because that’s where the majority of the weight is born. Press down firmly across on
3. Before positioning the item on the surface, remove the protective foil from the tape. Take care not to touch the exposed adhesive surface as this could affect the adhesion.

4. Ensure an optimal bond with the surface by pressing firmly on the item for another 5 seconds